Learn Ten Tips to Create an Easy Sprinkler Irrigation System

Learn Ten Tips to Create an Easy Sprinkler Irrigation System

Sprinkler installation system in the ground sprays a precise amount of water, then automatically stops. You can learn how to install one yourself here, as well as how much it costs.

Landscapes with lush grass, flourishing trees, and vibrant flowers increase the curb appeal of a home. Maintaining such a lavish setting with sprinklers while reducing water usage is the best solution.

Creating a plan is the first step in starting your DIY project. Custom-design systems are available from many manufacturers that are suited specifically for your yard and region.

To support sprinklers, you’ll need about 10 to 13 GPM (gallons per minute) of water flow, and that pressure has to be at least 30 to 35 psi (pounds per square inch). Alternatively, you can sketch your property boundaries using the template they provide. When you submit the sketch, you’ll receive a detailed plan for your landscape, as well as detailed instructions and a list of all the supplies you’ll need from the hardware store.

Start with Removing the Sod.

Prepare the ground for landscaping sod installation before digging the hole. You shouldn’t notice any effects of your efforts in your yard – except for the greener grass.

Have the envy of your neighbors with greener grass!

Utilizing a Vibrating Plow, Pull the Pipes

Thru-ground pipe pulling is better and faster than digging trenches and creates less mess than digging ditches. When using a pipe pulling machine, you should consider the following factors:

  • Keep away from trees. (Consider that the root structure extends far beyond the trunk, with the canopy size typically the same as the root structure).
  • Approximately 10 inches is a good depth for your shot.
  • When you pull the pipe into the hole, feed the pipe into the hole as you draw.
  • Don’t pull spliced pipes (they may fall apart underground).
  • You need to pull all the hoses as soon as possible when you rent a snowplow. Depending on your rental agreement, you may only need to rent for a half-day to save money.
  • Using a vibratory plow on super compact soil might not be viable. Perhaps a trencher would be more appropriate. Renters can have their soil types identified by their local rental center.
  • During the winter season, apply for and take advantage of commercial snow removal services to avoid freezing of water.

Objects Obstructions Bore

In addition to horizontal drilling, some vibratory, commercial snow plowing services and trenchers can also handle vertical drilling. Renting a plow and boring rods and drill head together is an excellent idea if you have to dig under a sidewalk or driveway.

Maintain the cleanliness of your pipes

Sprinkler System Installation in 10 Steps - This Old House

Along with dirt and rocks, these professionals have brought surprises like snakes and frogs blocking their pipes. The heads can get clogged with dirt and debris when they get into the lines. Duct tape the ends so that all that stuff stays out. Make sure that you flush the tube before installing that head if you have kicked dirt down it. You can also use commercial parking lot sweeping in practice to maintain the area.

You Shouldn’t use Saws to cut Pipes.

Pipes can become clogged when they undergo a saw due to plastic shavings left behind. Poly pipe cutters are inexpensive and work well. Consider selecting one that is brightly colored so that it is easily visible in the grass. The price of a pipe cutter like this at most home centers is less than $10.

Main Lines with Double Clamps

The quick and easy way to secure pipes and fittings with crimp clamps is to use them, but they can sometimes extend the pipe slightly. It leads to connections that are less than perfect. Applied crimp rings to each appropriate link on the main lines (the ones leading to zone valves) are extra protection against leaks since the main lines are usually pressurized. Using the two clamps, draw the ears backward to offset any pipe distortion.

Attach Swing Pipes to the Heads

A swing pipe, sometimes called “funny pipe,” is installed in the yard sprinkler system between the poly pipe and the sprinkler head. Due to the flexibility of the funny pipe, the torso can move even more precisely. The head can then proceed to survive if it runs over another vehicle or rides over frozen ground. The joint could be damaged whenever the fitting that connects the rigid poly pipe and the head moves.

Eliminate Kinks

Weak spots result from kinking poly pipes. Straightening the tube won’t help. By contrast, splice two lines that are flat with a couple to eliminate the kink. Add extra clamps to the fitting if you pull a spliced pipe and attach the most extended section to the plow. Using a self-watering planter will save you time and money while growing healthier produce.

It’s Easy and Fast to Fit Self-Tapping Fittings

The traditional tee fittings are difficult to install when you bury pipes instead of trenching. It is best to install self-tapping fittings (saddles) on continuous line runs to tap heads directly through the tube. It is easy to install the harness on the pipe by snapping it and screwing in the spike. You will be ready to ride as soon as you attach your funny line to the saddle.

Water-Saving Controllers

According to the EPA, US households use an average of nearly nine billion gallons of outdoor water each day for irrigation. It appears that inefficient irrigation systems and methods waste as much as 50 percent of irrigation water.

Yard sprinkler controllers typically switch every zone on and off for a defined period. As rain falls, a rain gauge attached to a controller will monitor rainfall and turn the system off during the main event. The combination of a well-designed controller and a well-functioning system can save as many as 300 gallons of water per day! I know that’s helpful, but we now have controllers and sensors that can track temperatures, sunlight, and other seasonal conditions and automatically adjust watering schedules based on those conditions.